Quick
Disconnect Plug
The
Rebling Type 7007 Quick Disconnect Plug is a two-socket,
four-wire plug designed and qualified to the requirements
of MS25182-2 and MIL-P-18148. The 7007 mates with
Rebling's type 7002 aero-battery receptacles and
all other receptacles meeting specification MS3509.
A
unique feature of the Rebling 7007 Quick Disconnect
is the self-aligning sockets that compensate for
part-to-part dimensional variations and any movement
of the mating receptacle caused by structural
loading. The extra large contact area of the Rebling
7007 socket means very low electrical losses.
These features and the "compliant" socket design,
ensure low contact resistance and low insertion
force throughout the life of the part.
The
7007 plug accommodates rapid connection and release
of the electrical load from the battery. Rotation
of the handles in a clockwise direction engages
the Quick Disconnect with the battery receptacle
and maintains it in a locked position. Rotation
in a counter-clockwise direction unlocks the unit.
Positive and negative terminals are located on
either side of the unit, with cable entry holes
located horizontally. Polarity markings on the
outside and inside of the unit prevent incorrect
electrical connections.
The
7007 body is made from a chemically resistant
and fungus-resistant glass reinforced plastic.
Contacts are silver-plated copper alloy. The plug
can accommodate up to 000 wire on both positive
and negative terminals.
INSTALLATION NOTE: The plastic rings that cover the 10-32 nuts for fastening the two halves of the housing together are designed to wiithstand 15 lb. of force. When re-assembling the housing, be sure to not use excessive pushing force on the mating screws.
|
